Einhell Gas Canon with Ventilator

1.     Housing made of stainless steel sheet
2.     Carry handle
3.     Heating jacket made of galvanized sheet steel
4.     Piezo ignition
5.     On/Off switch for fan
6.     Backfire guard
7.     Piezo-electric flame guard
8.     Gas hose
9.     Pressure regulator 700 mbar
10.     Gas valve button
11.     Solenoid valve
12.     Mains power cable

• Nominal heat output 10 kW
• Air volume operation range 350 m³/h
• Consumption nominal heat output 728 g/h
• Operating pressure max. 700 mbar
• Type of gas bottle which can be used 5 kg - 11 kg - propan-butan gas bottle
• Type of gas Propan; Butan or Propan-Butan mixture
• Mains Supply 220-240 V | 50 Hz
• Power 30 W
• Unit Dimensions 39.5 cm x 18 cm x 29 cm

The HGG 110/1 Niro is a handy powerful hot air generator that's easy to use in the garden and at building sites. It is ideal for heating well-ventilated areas, garages and even tents. Not only is the hot air generator very sturdy with its galvanized sheet steel heating jacket and stainless steel sheet housing, but it is also protected against overheating of the housing. The HGG 110/1 Niro is easy to transport as it weighs very little and is fitted with a handy carry handle. The fan can be switched on or off using the built-in switch. The hot air generator is connected to a standard 5 kg or 11 kg propane/butane cylinder and is easy to start up using the gas valve button and ignition button. The built-in piezo ignition unit and the safety thermostat against overheating ensure safe operating. Backfire guard and piezo electronic flame guard guarantee the gas flow switch-off in a emergency case. Pressure regulator as standard accessory included. The hot air generator is also fitted with a long enough mains power cable and supplied with a gas hose. This article is designed for use in GER + AT.